Return to previous page

ABB 2100412-003, TFIO Mod, Combo IO Valve Control, Blue

TFIO Mod, Combo IO Valve Control, Blue
Item #: 2100412-003

Product Info


Module Assembly, TFIO, Combo Input/Output Valve Control, Blue, 5VDC Internally up to 5VDC Nom., Capacitance 1000pF Typical Overview: 2100412 TFIO Module is a software-configurable combination I/O Module specifically tailored for Valve Control applications. The module incorporates six general -purpose digital/pulse input/outputs. Two source mode digital outputs and one 4-20mA sink/source mode analog output are also provided. Wiring Requirements: Sufficient gauge wire should be used to handle total load current. Use shielded pair or twisted pair conductors to reduce the possibility of erroneous transitions on the inputs in high EMI/RFI environments. (Ground the shield at field device only) When digital outputs are used to sink current, the sum total sink current for all points and modules should not exceed 5A total. If more than 5A are required, separate ground wires from module output ground to power source ground terminal (bus bar) are required. Failure to do so may cause erratic system operation. Specifications: General Digital Input/Outputs 6 Channels Input: Dry Contact or voltage type • Minimum contact resistance to activate input 150KO • Maximum voltage to activate the input: 3.8V (referenced to GND terminal.) • Minimum voltage to deactivate the input: 4.75V (referenced to GND terminal.) Output: Open Drain FET Sink • RDS(ON): 0.060O Typical • Maximum continuous sink current: 2A @ 24VDC Source Digital Outputs 2 Channels • IoVBB supply @ 2A Max Analog Output 1 Channel • Maximum allowable voltage range on VDC source, 1 sink or 1 source: 26.5 VDC. • Maximum External Power Source: 26.5VDC • Maximum load resistance (internal/external powered) 0 Ohms • Maximum load resistance (internally powered) 350 Ohms • Maximum load resistance RMAX (Calculated): (VDC External -4) x 50

Item Specifications

  • 2.39 lbs per EA
Add to Cart
Factory Order UOM : EA